Moldzyme  Removes Mildew and Mold  32 oz. Spray

EcoDiscoveries is the only safe and effective solution for mold and mildew.

Plant-derived enzymes do more than clean.

Moldzyme penetrates to remove mold at the source, eliminating stains and odors.

You’re left with a safe environment and a new level of clean.

Safe has a strong side.

Features & Benefits

MoldZyme free from hazardous chemicals so your environment can be too.

Non-Toxic Petroleum-Free Ammonia-Free Hypoallergenic

Biodegradable Glycol-Free Caustic-Free Fragrance-Free

Chlorine-Free Phosphate-Free No Animal Testing Dye-Free

This is an enzymatic mold cleaner with muscle that is safe around children and pets and most any surface.

Where to Use

MoldZyme is safe for the many surfaces of your world. Spray and wipe clean with a towel or brush on any surface that can have contact with water: carpet, fabric, cars, walls, concrete, plastic, vinyl, drywall, crawlspaces, pools, dog houses, wood, decks, porches, stucco, brick, metals, attics, grout, baths, furniture, and more.

Ingredients

Water, enzymes (an extract from sugarcane fermentation) and surfactants (from coconuts).

Made in the U.S.A.

MSDS:

Printed Date: 9/7/07 Page 1 of 2 Rev.: 00
3. Hazards Identification
Health Rating: 0 - None
Flammability Rating: 0 - None
Reactivity Rating: 0 - None
Contact Rating: 0 - None
Potential Health Effects
Inhalation: None
Ingestion: Mild diarrhea if ingested
Skin Contact: None
Eye Contact: None
Signs and symptoms of Exposure: Mild irritation to mucous membranes and eyes.
Medical Conditions Generally Aggravated by Exposure: Mild Skin and eye irritation.
Emergency and First Aid Procedures: Rinse exposed areas with water.
4. First Aid Measures
Inhalation: None
Ingestion: None
Skin Contact: Wash with soap and water.
Eye Contact: Wash/flush thoroughly with clean water. Get medical advice if irritation develops.
MSDS
Material Safety Data Sheet
1. Product Identification:
EcoDiscoveries™ MoldZyme™
A Division of Sorbent Technologies, Inc.
2377 John Glenn Drive, Suite 106, Atlanta, GA 30341 USA
Tel: 770-936-0323 Fax: 770-936-0326
Form #: STI-013
EcoDiisscoverriiess™
2. Hazardous Ingredients / Identity Information
CAS No.: None
Hazardous Ingredients: None
OSHA PEL: None
ACCGIH TLV: None
Natural blend of enzymes
Fermented by products of sugar cane and vegetables
Non-ionic surfactant
Citric Acid
Filtered water
5. Fire Fighting Measures
Fire: N/A
Explosion: N/A
Fire Extinguishing Media: N/A
Special Information: None
6. Accidental Release Measures
Product is biodegradable and ecologically harmless. Rinse spill with water if desired.
Printed Date: 9/7/07 Page 2 of 2 Rev.: 00
8. Exposure Controls / Personal Protection
Personal Respirators: None
Skin Protection: Gloves optional
Eye Protection: Goggles if spraying
Other protective clothing or equipment: Optional
Airborne Exposure Limits: None
Ventilation System: Local exhaust: Not required
Mechanical: Not required
9. Physical and Chemical Properties
Appearance: amber brown; pleasant odor
Boiling Point: 212ºF
Vapor Pressure (23.5ºC / 75ºF): 21.84 mm Hg
Vapor Density: N/A
Water Solubility: Infinitely soluble
Specific Gravity: 1.07g/ml (H2O = 1)
Melting Point: Liquid
Evaporation Rate: Same as water
10. Stability and Reactivity
Stability: Stable. Protect from moisture and light.
Conditions to avoid: High caustics or acids (pH above 9.5 or below 3.5); High temps (+130 ºF)
Incompatibilities: Caustics (pH
9.5); steam
Hazardous polymerization: Will not occur
11. Toxicological Information
Carcinogenicity: None
Chronic effects: None
12. Ecological Information
No data available.
13. Disposal Considerations
Flush with water. Safe for sewer disposal. Harmless to aquatic, plant and animal life.
14. Other Information
The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide.
Sorbent Technologies, Inc. shall not be held liable for any damage resulting from handling or from contact with the
above product.
15. Disclaimer
The data set forth in this sheet are based on information provided by the suppliers of the raw materials and chemicals
used in the manufacture of the aforementioned products.
Sorbent Technologies, Inc. warrants that its products conform with their published specifications, and no other express
warranty is made with regard thereto. We do not guarantee favorable results, and we assume no liability in connection
with the use of the products. They are intended for use by persons having technical skill and knowledge at their
discretion and risk.
7. Handling and Storage
Store at temperatures below 120ºF/48.8ºC; avoid prolonged freezing.
Storage Segregation Hazard Classes: N/A
May induce rusting of mild steel containers.